Beurer OT 30 Mode D'emploi page 50

4� If Bluetooth
phone is in range, the measurement is transferred to your smart-
phone immediately after completion of the measurement� Dur-
ing data transfer, the LED ring on the thermometer lights up blue�
Once the data transfer has been successfully completed, the
LED ring flashes twice�
If you want to transfer the measurements at a later point in time,
you have to switch to the thermometer's measurement memory�
5� The measurement duration is 3 minutes� Once the measure-
ment is completed, the acoustic signal sounds� Please always
wait until the end of the measurement before you remove the
thermometer from the place of measurement� The last 30 meas-
ured values remain saved� The device switches off automatically
around 30 seconds after the end of the measurement� You can
also switch off the thermometer before this time by pressing the
On/Off button for 3 seconds�
is activated on your smartphone and your smart-
®
50