Removing A Handset; Setting Up A Handset On Another Base; Selecting A Base - Topcom BUTLER 4502 TWIN Manuel D'utilisateur

Topcom Butler 4502/Twin/Triple/Quattro
DECT GAP Profile only guarentees that basic calling-functions will work
correctly between different brands/types. There's a possibility that
certain services (like CLIP) will not work correctly.
6.2

Removing a handset

You can remove a handset with a base to allow another handset to be registered
1. Enter the menu by pressing
2. Select SETUP using the up
3. Press OK
4. Select DEL HANDSET using the up
5. Press OK
6. Enter the 4 digit base PIN code
7. Press OK
8. Select the handset to be removed
9. Press OK to validate
6.3

Setting up a handset on another base

If you want to use a Butler 450x handset with a base of another model. The base must be
GAP compatible.
1. To put the base in registration mode, refer to the base user manual.
2. Carry out operations 3 to 10 from the paragraph 6.1.
6.4

Selecting a base

The handsets can be registered up to 4 bases simultaneously.
To select a base:
1. Enter the menu by pressing
2. Select REGISTER using the up
3. Press OK
4. Select SELECT BASE using the up
5. Press OK
6. Select a base or select AUTO using the up
7. Press OK
When selecting the base, the currect selected base in indicated by a blinking base number.
If you select 'Auto' the handset will automatically search for another base when you are out
of range!
22
/OK
and down keys
and down
/OK
and down keys
and down
and down
keys
keys
keys
Topcom Butler 4502/Twin/Triple/Quattro