CAIRE FreeStyle Comfort Manuel D'utilisation page 16

FreeStyle Comfort
4. Turn on the FreeStyle Comfort by pressing the
power button and select your prescribed flow
setting utilizing the increase (+) or decrease (-)
flow buttons.
Note: If the battery pack needs to be recharged,
the battery icon on the display will have a single
orange bar.
DC POWER
DC power is for use in the accessory outlets of
automobiles, boat, or other motor vehicles. The
FreeStyle Comfort is fully functional for use on DC
power. The FreeStyle Comfort will also recharge
the battery pack if needed any time DC power is
available. The battery pack will recharge both if the
unit is off, or on and in use.
WARNING: DO NOT CONNECT
EXTERNAL POWER WITHOUT A
BATTERY PACK INSTALLED IN THE
OXYGEN CONCENTRATOR.
WARNING: DO NOT OPERATE THE DEVICE ON
12 VDC CAR OUTLETS WHILE THE VEHICLE IS
TURNED OFF.
1. Turn on your motor vehicle.
2. Connect the DC power supply to the power
port receptacle front, bottom right side of the
FreeStyle Comfort. Be sure to push inward so
that the connection is secure.
16 - ENG PN MN232-C4 J | User Manual
3. Connect the opposite end of the DC power cord
to the automobile or other DC accessory outlet.
4. Turn on the FreeStyle Comfort by pressing the
power button and select your prescribed flow
setting utilizing the increase (+) or decrease (-)
flow buttons.
Note: If the battery pack needs to be recharged,
the battery icon on the display will have a single
orange bar.