Yamaha RS Venture RST90GTY 2009 Mode D'emploi page 62

1
a
1
REAR SUSPENSION
WARNING
This shock absorber contains highly pressur-
ized nitrogen gas.
Do not tamper with or attempt to open the
shock absorber assembly.
Do not subject the shock absorber assembly to
flames or high heat, which could cause it to
explode.
Rear side
• Turn the spring preload adjuster 1 to proper
position.
Spring preload
adjuster position
Spring preload
Standard
WARNING
Always adjust both spring preload (left and
right) to the same setting. Uneven adjustment
can cause poor handling and loss of stability.
2. Adjust:
• Sliding frame extension spring preload
Adjustment steps:
• Turn the adjusting nut 1 in or out.
RST90TF
Adjusting nut
Preload
Snow condition
Standard length a
NOTICE
Be sure the left and right spring preload is
same.
21
INSP
ADJ
S M H
Soft Medium Hard
M
Turn in Turn out
Harder Softer
lcy Soft
16 ~ 18 mm (0.63 ~ 0.71 in)