Yamaha RS Venture RST90GTY 2009 Mode D'emploi page 30

EXHAUST GAS VOLUME ADJUSTMENT (For Europe)
7. Press the "SELECT" and "RESET" buttons to
1
select a cylinder number 1.
TIP
The selected cylinder number appears on the clock
LCD.
8. After selecting the cylinder number, simulta-
neously press the "SELECT" and "RESET" but-
tons for 2 seconds or more to activate the
selection.
9. Change the CO adjustment volume 1 by press-
ing the "SELECT" and "RESET" buttons.
TIP
_
The CO adjustment volume appears on the odome-
ter/tripmeter LCD.
• To decrease the CO adjustment volume, press
the "RESET" button.
1
• To increase the CO adjustment volume, press the
"SELECT" button.
10. Release the "RESET" and "SELECT" buttons to
activate the selection.
11. Turn the main switch to "off" to cancel the mode.
5
INSP
ADJ