Changing The Language; Display Functions - Eaton 9130 Guide D'installation

Table 5. Indicator Descriptions
Indicator Status
On
Green Flashing
On
Flashing
Yellow
On
Yellow
On
Red
EATON 9130 (9910-E15/E16) UPS Installation Guide for IBM
Table 5 shows the indicator status and description.
Description
The UPS is operating normally.
A new information message is active.
The UPS is in Battery mode.
The battery voltage is below the warning level.
The UPS is in Bypass mode.
The UPS is operating normally on bypass during High Efficiency operation.
The UPS has an active alarm or fault. See "Troubleshooting" in the UPS user's
guide for additional information.

Changing the Language

Press and hold the first button on the left for approximately three
seconds to select the language menu. This action is possible from any
LCD menu screen.

Display Functions

As the default or after 15 minutes of inactivity, the LCD displays the
start screen.
The backlit LCD automatically dims after 15 minutes of inactivity. Press
any button to restore the screen.
Press any button to activate the menu options. Use the two middle
buttons ( and ) to scroll through the menu structure. Press the Enter
( ) button to select an option. Press the
to the previous menu.
ESC
button to cancel or return
S
® Applications 164201783 Rev 2
OPERATION
19