Technical Description; Installing And Connecting The Dc Kit - Dometic DC-Kit1 Instructions De Montage Et De Service

DC-Kit1
6

Technical description

The DC-Kit1 extension kit enables Dometic roof air conditioners to be used in vehi-
cles with 12 Vg. The extension kit consists of the following components:
• The ECL-76 charging current distributor with low voltage protection regulates
the power distribution between the starter battery, supply battery and light-
machine. This prevents the battery and the electronics in the vehicle from over-
loading.
• The PP1002 inverter supplies the roof air conditioner with the required input
voltage of 230 Vw. The inverter generates the 230 V input voltage from the 12 V
on-board electricity supply in the vehicle.
The accompanying remote control can switch the inverter on and off.
The integrated priority circuit can be used for distributing the voltage in the
vehicle with two available power sources. If a mains voltage and voltage created
by the inverter (vehicle battery) are both connected to the device, the use of the
mains voltage has priority. If the only voltage available is that generated by the
inverter, the power supply from the battery is used. This ensures that the limited
power of the battery is not used unnecessarily.
• The inverter adapter ensures that the condenser fan for the roof air conditioner
can control the speed.
7

Installing and connecting the DC kit

A
NOTICE!
The DC kit may only be installed by a qualified workshop.
The following information is intended for specialists who are familiar with
the guidelines and safety precautions to be applied.
A
NOTICE!
Observe the information in the installation and operating manuals when
installing the components supplied
• PP1002 inverter
• Inverter adapter
• MCR9 remote control
• ECL-76 charging current distributor
and for your Dometic roof air conditioner
• CA1000
• FJ 1100
EN
Technical description
9