Intended Use; Technical Description - Dometic DC-Kit4 Instructions De Montage Et De Service

Masquer les pouces Voir aussi pour DC-Kit4:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34
DC-Kit4
5

Intended use

The DC extension Kit4 (ref. no.: 9100300044) is suitable for equipping the following
Dometic roof air conditioners for 12 Vg driving:
• B2600, B3200
• FJ1100, FJ1700, FJ2200, FJ2600, FJ3200
The SinePower MSI2312T inverter is only designed for the cooling device in the roof
air conditioner not for the heating mode, as the heating elements take more power
than the inverter is able to generate in continuous operation.
I
NOTE
The heat pump function of the B2600 is available when used with the
inverter.
6

Technical description

The DC extension Kit4 enables Dometic roof air conditioners to be used in vehicles
with 12 Vg. The extension kit consists of the following components:
• The ECL-102 charging current distributor with low voltage protection regulates
the power distribution between the starter battery, supply battery and light-
machine. This prevents the battery and the electronics in the vehicle from
overloading.
• The SinePower MSI2312T inverter supplies the roof air conditioner with the
required input voltage of 230 Vw. The inverter generates the 230 V voltage from
the 12 V on-board electricity supply in the vehicle.
The integrated priority circuit can be used for distributing the voltage in the
vehicle with two available power sources. If a mains voltage and voltage created
by the inverter (vehicle battery) are both connected to the device, the use of the
mains voltage has priority. If the only voltage available is that generated by the
inverter, the power supply from the battery is used. This ensures that the limited
power of the battery is not used unnecessarily.
• The MCR9 remote control can switch the inverter on and off.
EN
Intended use
9

Publicité

Table des Matières
loading

Table des Matières