Dometic DC-Kit1 Instructions De Montage Et De Service page 11

DC-Kit1
7.2 Installing components
➤ Install the ECL-76 charging current distributor.
➤ Install the PP1002 inverter.
D
DANGER! Electrocution!
Only connect the battery once you have the completed all the installa-
tion work and you are certain it has been done properly.
7.3 Connecting the CA1000 Dometic roof air conditioner
➤ Remove the air outlet of the roof air conditioner ( CA1000) (fig. 1, page 2).
➤ Insert the on/off cable for CA1000 into the socket on the control board of the
roof air conditioner (fig. 3 1, page 3).
➤ Lay the on/off cable of the roof air conditioner to the ECL-76 charging current
distributor.
➤ Connect the on/off cable with connections I2 and I3 of the charging current
distributor ( ECL-76) (fig. 4, page 3).
➤ Attach the air outlet of the roof air conditioner ( CA1000) (fig. 1, page 2).
7.4 Connecting the FJ1100 Dometic roof air conditioner
➤ Remove the air outlet of the roof air conditioner ( FJ1100) (fig. 5, page 4).
➤ Insert the adapting cable for FJ1100 into the socket on the control board of the
roof air conditioner (fig. 6, page 4).
➤ Lay the on/off cable of the roof air conditioner to the ECL-76 charging current
distributor.
➤ Connect the on/off cable with connections I4 and I2 of the charging current
distributor ( ECL-76) (fig. 4, page 3).
➤ Connecting the inverter adapter ( inverter adapter).
➤ Attach the air outlet of the roof air conditioner ( FJ1100) (fig. 5, page 4).
EN
Installing and connecting the DC kit
11