Atag OX4411B Mode D'emploi page 179

CLEANING (CONTINUED)
WARNING:
• NEVER use benzene, thinner or a metal scrubber to clean. Otherwise, it can cause
discoloration or damage to the surface.
• Do not spray water onto the machine when cleaning it. This can lead to electric shock or
fi re.
• Do not expose tray to direct sunlight to dry it. This can result in mal formation or damage.
2 Cleaning the oven surface, control
panel and window.
The surface of the oven can be
wiped with a wet dish towel,
followed by a dry cloth to remove
the water completely.
Do not use force when cleaning
the control panel as it can be
damaged while cleaning.
Clean the transparent window with
a neutral detergent-dipped dish
towel and then with a dry cloth
until no water remains.
3 Cleaning the tray.
Wipe them with a sponge dipped
in a neutral detergent and then
rinse them with water.
4 Cleaning the accessories.
Wipe them with a neutral detergent
and dry them before inserting
them back into the cooking cavity.
Do not use force on the
accessories when wiping them
with a scrubber, as this may
damage the coated surface.
EN 39