Projecting - Sony VPL-PX40 Mode D'emploi

Projecting

COMMAND
OFF ON
PIC
PJ NETWORK
MUTING
AUDIO INPUT
D KEYSTONE
LENS
VOLUME
APA HELP
MENU/
TAB LASER
FREEZE
1
Plug the AC power cord into a wall outlet, then connect all equipment.
The ON/STANDBY indicator lights in red and the projector goes into
standby mode.
2
Press the I /
The ON/STANDBY indicator lights in green.
3
Turn on the equipment connected to the projector.
4
Press the INPUT key to select the input source.
To input from
Computer connected to the INPUT A connector
Computer connected to the INPUT B connector
Computer connected to the INPUT C (digital) connector INPUT C
Computer connected to the INPUT D connector
Video equipment connected to the VIDEO input
connector
24
GB
Projecting
Rear remote control
detector
I /
INPUT
LAMP/ TEMP/
COVER FAN
1 key.
MENU APA
ENTER RESET
VOLUME
POWER ON/
SAVING STANDBY
ON/STANDBY
indicators
Press INPUT to display
INPUT A
INPUT B
INPUT D
VIDEO