To Adjust The Volume - Sony VPL-PX40 Mode D'emploi

To input from
Video equipment connected to the S VIDEO input
connector
Smart APA (Auto Pixel Alignment) adjusts the picture of the connected
equipment so that it is projected clearly.
Notes
• If "Auto Input Search" is set to "On", the projector searches for the signals from
the connected equipment and displays the input channel where the input signals
are found.
For details, see "Auto Input Search" in the SET SETTING menu on page 35.
• The smart APA is effective for the input signal from a computer only.
When the projector is connected to a notebook or a computer with a built-in
LCD screen, you may have to switch the computer to output to the projector by
pressing
5
Turn the zoom ring to adjust the size of the picture.
6
Turn the focus ring to adjust the focus.
Attention
Looking into the lens when projecting may cause injury to your eyes.

To adjust the volume

The volume can be adjusted in the on-screen menu. See "Volume" in the
PICTURE SETTING menu on page 33.
To mute the picture
Press the PIC MUTING key on the Remote Commander. Press again to restore
the picture.
key and key (such as
Fx
Fn
F7
or
Fn
Press INPUT to display
S VIDEO
.)
/
LCD
VGA
Fx
25
GB
Projecting