To Adjust The Volume - Sony VPL-CS3 Mode D'emploi

5
Turn the zoom lever to adjust the size of the picture.
6
Turn the focus lever to adjust the focus.
Caution
Looking into the lens when projecting may cause injury to your eyes.

To adjust the volume

The volume can be adjusted in the on-screen menu. See "VOLUME" in the
PICTURE CTRL menu on page 25.
To get the clearest picture
You can adjust picture quality when projecting a signal from the computer.
1
Project a still picture from the computer.
2
Press the APA key.
"Complete!" appears on the screen when the picture is adjusted properly
Notes
• Press the APA key when the full image is displayed on the screen. If there are black
edges around the image, the APA function will not function properly and the image
may extend beyond the screen.
• When you switch the input signal or re-connect a computer, press the APA key again
to adjust the picture again.
• You can cancel the adjustment by pressing the APA key again while "ADJUSTING"
appears on the screen.
• The picture may not be adjusted properly depending on the kinds of input signals.
• Adjust the items in the INPUT SETTING menu when you adjust the picture manually.
20
GB
Projecting
.