Connecting With A Vcr Or 15K Rgb/Component Equipment - Sony VPL-CS3 Mode D'emploi

To connect an IBM PC/AT compatible computer
Left side
Stereo audio connecting cable (not supplied)
To connect a Macintosh computer
Use an ADP-20 signal adapter (not supplied).

Connecting with a VCR or 15k RGB/Component Equipment

This section describes how to connect the projector to a VCR and 15k RGB/
component equipment.
For more information, refer to the instruction manuals of the equipment you
are connecting.
To connect a VCR
Left side
HD D-sub
15-pin cable
(supplied)
Stereo audio connecting cable (not supplied)
Video cable (not supplied)
S-Video cable (not supplied)
Computer
to monitor output
to audio output
to video output
to S video
output
VCR
Connecting the Projector
to audio
output
15
GB