Connecting With A Vcr Or 15K Rgb/Component Equipment - Sony VPL-ES1 Mode D'emploi

Connecting with a VCR or 15k RGB/Component Equipment

This section describes how to connect the projector to a VCR and 15k RGB/
component equipment.
For more information, refer to the instruction manuals of the equipment you
are connecting.
To connect a VCR
Left side
AUDIO
AUDIO VIDEO S VIDEO INPUT A
MONITOR OUT
a) Use a no-resistance cable.
To connect a 15k RGB/Component equipment
Left side
AUDIO AUDIO VIDEO S VIDEO INPUT A
MONITOR OUT
a) Use a no-resistance cable.
Stereo audio connecting cable (not supplied)
Video cable (not supplied) or S-Video
cable (not supplied)
SMF-402 Signal Cable (not supplied)
HD D-sub 15-pin (male) ↔ 3 × phono jack
Stereo audio connecting cable
(not supplied)
a)
to video
output
to S
video
output
VCR
a)
to audio
output
15k RGB/Component equipment
Connecting the Projector
to audio
output
to RGB/
component
output
19
GB