Location And Function Of Controls; Control Panel; Front/Left Side; Connector Panel - Sony VPL-PX40 Mode D'emploi

Location and
Function of Controls

Front/Left Side

Rear/Right Side/Bottom

10
GB

Location and Function of Controls

a Handle
b Zoom ring
Adjusts the picture size.
c Control panel
For details, see "Control Panel" on
page 12.
d Connector panel
For details, see "Connector Panel" on
page 13.
e AC IN socket
Connects the supplied AC power cord.
f Front remote control detector
g Lens
Remove the lens cap before projection.
h Ventilation holes (exhaust)
i Focus ring
Adjusts the picture focus.
j Rear remote control detector
k Indicators
• LAMP/COVER: Lights up or flashes
under the following conditions:
– Lights up when the lamp has
reached the end of its life or
becomes a high temperature.
– Flashes when the lamp cover or air
filter cover is not secured firmly.
• TEMP (Temperature)/FAN: Lights
up or flashes under the following
conditions:
– Lights up when temperature inside
the projector becomes unusually
high.
– Flashes when the fan is broken.
For details on the LAMP/COVER and
the TEMP/FAN indicators, see on
page 43.
• POWER SAVING: Lights up when
the projector is in power saving mode.
When POWER SAVING in the SET
SETTING menu is set to ON, the
projector goes into power saving mode
if no signal is input for 10 minutes.