EN
G
•
Refer to the TECHNICAL SUMMARY of the
HTL to define
1. the minimum body width S min.
2. the cut-out dimensions X1, X2, determining
the size of the mounting plates for the vehi-
cle rear lights and the slots for the lift arms /
cylinders of the HTL. Or, the opposite way
around, the dimensions indicating which arm
width will suit a predetermined rear body
configuration. [See Fig. 3.8].
CA
Arm width
W
Chassis width
X1
Width of mid panel
X2
Thickness of rear cross member
•
Adjust the rear side of the body accordingly. X1 and X3
depend on the arm width CA. X2 depends on the fitting
height C.
•
The height of the rear cross member X2 varies also on the
shape of the platform: standard platform hands or option
S245.S [See Fig. 3.11].
DHOLLANDIA
3.10
EX.
[DH-SMR80]
3.11
EX.
[DH-SMR80]
1
23
X2 (1)
1
2
2
Option
X2 (2)
S245.S