Notes On Power Sources; Maintenance - Sony CALLER ID SPP-ID400 Mode D'emploi

Notes on power sources

On battery pack
• Store the battery pack at a
temperature between 41°F (5°C) and
95°F (35°C) for best performance.
• If you do not use the handset for a
long period of time, remove the
battery pack after charging for more
than 12 hours.
• Keep the battery pack away from fire.
• Do not short-circuit the battery
terminals.
• Do not disassemble the battery pack.

Maintenance

On Handling
• Do not attempt to disassemble the
casing. Refer servicing to qualified
personnel only.
• Do not put foreign objects into the
unit. Should any liquid or solid object
fall into the unit, unplug the unit and
have it checked by qualified personnel
before operating the unit any further.
• Do not put anything in the DC IN 9V
(external power input) jack.
• Do no drop the unit as a malfunction
may result.
On the safety
• Do not unnaturally bend or crimp the
cord, and do not place heavy objects
on it.
• If the cord or plug is damaged, do not
continue to use it. Contact your local
Sony dealer for replacement.
On power failure
During a power interruption, you
cannot make or receive calls.
On cleaning
• Clean the cabinets with a soft cloth
slightly moistened with water or a
mild detergent solution. Do not use
any type of abrasive pad, scouring
powder or solvent such as alcohol or
benzine as they may damage the finish
of the cabinet.
• If the charge terminals of the base unit
and handset are soiled, wipe them
with a soft cloth or paper.
If you have any questions or problems
concerning your phone, please consult
your nearest Sony dealer.
Additional Information
33 EN