Other Information; Handling The Phone Units; Precautions; On Power Source - Sony ID Telephone SPP-ID200 Mode D'emploi

Other information

Precautions

On power source

On maintenance

32

Handling the phone units

• Before initial use, insert the battery pack into the base unit and
charge it for 10 hours.
• Operate the base unit only on 9V DC. Use the AC power adaptor
supplied. Do not use any other AC power adaptors as they may
cause malfunction.
• Connect the base unit into an AC outlet which has a continuous
power supply. Avoid outlets where power may be cut off.
• Store the battery pack at a temperature between 5°C (41°F) and
35°C (95°F) for best performance.
p To clean the cabinets
Clean the cabinets with a soft cloth slightly moistened with water
or a mild detergent solution. Do not use any type of abrasive pad,
scouring powder or solvent such as alcohol or benzine as they
may damage the finish of the cabinet.
p To clean the battery terminals
If the terminals (metal parts on the battery pack) are soiled, the
battery life will become shorter. When this occurs, repeatedly
attach and remove the battery from the battery compartment. This
will improve the contact of the battery pack and the battery
compartment of the handset or the base unit. Also, wipe the
terminals with a soft cloth or paper.
SPP-ID200(EF) 3-810-886-21(1)