Sony CALLER ID SPP-ID400 Mode D'emploi page 35

Symptom
You hear five short error beeps
and can't store the speed
dialing.
Speed dialing is incorrect.
Speed dialing numbers
disappeared.
The handset doesn't ring when
calling from the base unit.
The caller's name and/or
phone number does not appear
on the display.
The caller's name and/or
phone number does not appear
on the display during call
waiting.
You cannot dial the number
from the Caller ID list.
"CONNECTING" is indicated
for a long time.
The Caller ID data disappeared.
Remedy
• Make sure you follow the procedure in storing the
number correctly (page 17).
• Make sure the number (including the tone and pause
digits) does not exceed 16 digits.
• Store a correct number (page 17).
• The handset battery is removed. The handset was kept
away from the base unit when the handset battery is
low.
• The handset may be engaged in conversation.
• The battery may have little or no power. Charge the
battery for more than 12 hours (page 9).
• Raise the antenna of the base unit vertically and fully
extended.
• Place the base unit away from noise sources (page 6).
• Move the handset closer to the base unit.
• Replace the handset on the base unit for a while to
reset the digital security code.
• Make sure you have subscribed to Caller ID service.
• Caller ID service may not work when the phone is
connected to a Private Branch Exchange (PBX).
• The call is made through company which does not
offer Caller ID service. "OUT OF AREA" will appear
on the display.
• The call was "blocked." "PRIVATE" will appear on
the display.
• You answered the call while "**RINGING**"is
displayed. Be sure to answer after the Caller ID data is
displayed.
• The handset is too far from the base unit, or the
handset battery is low or not installed.
• Make sure you have subscribed to "Caller ID with
Visual Call Waiting" service (see page 30).
• Make sure nobody is talking on another phone on the
same telephone line.
• Make sure you entered your area code correctly
(page 11).
• You may need to change the number of digits of the
phone number (page 29).
• This function may not work when the phone is
connected to a Private Branch Exchange (PBX).
• Move the handset closer to the base unit.
• Place the base unit away from noise sources (page 6).
• The handset battery is removed. The handset was kept
away from the base unit when the handset battery is
low.
continuación
Additional Information
35 EN