Assembly - REX BX-401 E Manuel De L'utilisateur

Assembly

Assembly
STEP 1
STEP 2
REX_Trainer_BX401E_13.indd GB-31 REX_Trainer_BX401E_13.indd GB-31
WARNING
1. Place the front foot (4) and the rear foot (2) on the
fl oor as illustrated.
2. Mount both feet to the frame (1). Use four Allen
screws each (7), four cap nuts (6), four spring clips
(9) with two washer each (8).
3. Screw the covers (10 + 11) to the main frame (1).
WARNING
1. Screw the locking screw (20) into the hole of the
frame (1).
2. Insert the saddle post (13) into the frame.
3. Align one hole of the saddle post with the locking
screw.
4. To adjust the height of the saddle post, pull the knob
of the locking screw towards the handlebars (see
Fig. a).
5. Make sure that the locking screw engages properly
and tighten it fi rmly.
6. Now fasten the saddle (69) with the saddle post (9)
using the washer (13) and the locking knob (19). The
saddle distance to the handlebar can be infi nitely
adjusted to your body height (see Fig. b).
GB-31
15.05.13 09:09 15.05.13 09:09