REX BX-401 E Manuel De L'utilisateur page 33

Assembly
Assembly
STEP 5
REX_Trainer_BX401E_13.indd GB-33 REX_Trainer_BX401E_13.indd GB-33
WARNING
1. Mount the left and right cover (40L + 40R) with two
screws (39) and four small screws (38).
2. Assemble the left (51L) and the right (51R) pedal.
During the assembly, make sure that both pedals are
installed on the respectively correct side, otherwise
they could break out. The right pedal is screwed in
clockwise and the left pedal is screwed in anti-clock-
wise. For better identifi cation, the pedals have been
marked with an "L" for left and an "R" for right.
Tighten both pedals fi rmly.
3. Set up the machine at the designated location.
4. Use the rear left and right height regulation to align
the home exercise machine so that it stands securely
and fi rmly.
5. Insert the plug of the mains adapter into the socket
at the rear right end of the home exercise machine.
6. Then insert the mains adapter into the power outlet.
The machine is ready to operate.
GB-33
15.05.13 09:09 15.05.13 09:09