Abicor Binzel iCAT Mode D'emploi page 59

iCAT
6.7 Attaching the ABIROB
1
®
1 ABIROB W torch neck
2 Positioning pin
Fig. 12 Attaching the ABIROB
1 Equip the ABIROB
2 Introduce positioning pin (2) into marked bore.
The ABIROB
3 Screw down ABIROB
iCAT ABIROB
NOTICE
• After using the torch for several days, it may happen that it cannot be disconnected by
hand. To do this, a suitable wrench is available. Do not use pliers to disconnect the torch.
BAL.0139 • 2018-06-21
®
W torch neck
3 iCAT ABIROB
®
W torch neck
®
W torch neck (1) with tip adaptor, contact tip and gas nozzle.
®
W torch neck (1) can only be fastened in this position.
®
W torch neck (1) with retaining nut (4) on the
®
W (3).
2
®
W 4
6 Putting into operation
3
4
Retaining nut
EN - 23