Installing The Canopy - Reely SKY F-16 ARF Notice D'emploi

l) Installing the canopy
Glue the magnet (1) into the plastic counter surface (2) using superglue.
Glue the metal plate (3) to the canopy from the bottom into the designated
recess using 5-minute epoxy glue.
Glue the plastic counter surface (1) into the provided cut-out in the cockpit
using 5-minute epoxy glue.
Install the connection cables under the plastic part.
Glue the canopy attachment (1) to the inside of the cockpit using 5-minute
epoxy glue. See the adjoining illustration.
The suitable counterpiece (2) is glued to the front of the canopy using 5-minute
epoxy glue.
44
Figure 34
Figure 35
Figure 36