Removing And Installing The Canopy; Fitting The Decal Sheet - Reely SKY Condor Notice D'emploi

h) Removing and Installing the Canopy
In order to remove the canopy, press the notch lever of the canopy lock (1)
backwards against flight direction with a fingernail.
Lift the canopy in the front and then remove the cover to the front.
To install the cover, first insert the holding peg into the fuselage and push the
cover all the way to the back.
Now press the front end of the cover onto the fuselage and ensure that the
notch lever of the cover lock locks properly.
Figure 18
i) Fitting the Decal Sheet
For the exact position of the different decals, refer to the images on the sales packaging.
37