Operation; The Display; Operation With The Cursor - switel CD728 Mode D'emploi

4 Operation

4.1

The display

The display is provided with an automatic backlight, which illuminates the display for ca.
10 seconds every time a button is pressed. The display can be re-lit with any button.
If the mobile unit is not used for more than 30 seconds, the screensaver, in the form of
an analogue clock, will switch on automatically. The screensaver can be switched off
again by means of the two display buttons. All other buttons likewise switch off the
screensaver but also go directly to the selected function.
4.2

Operation with the cursor.

All functions can be accessed by means of a very user-friendly menu. Here are a few
general instructions to help you find your way around the menu:
In standby mode (normal operation)
In the normal standby mode, you can go into the phone book in the
mobile unit directly with the up and down cursor buttons.
In the normal standby mode, you can go into the redial list with the left
and right cursor buttons.
In the menu
You can find the required items in the menu when programming by using the up and
down cursor buttons.
This level is opened with the OK display button.
You can then again find the required function using the up and down cursor buttons
and again confirm with the OK display button.
The left and right cursor buttons are used, amongst other things, for changing values.
You can go back one level each time by pressing the CANCEL display button.
You can leave programming mode at any time without making any changes by
pressing the
110
- Operation -
button.