Internal Room Monitoring (Baby Phone); Walkie-Talkie - switel CD728 Mode D'emploi

6.2

Internal room monitoring (baby phone)

With room monitoring, you can listen in to another room using a second mobile unit. A
second mobile unit is always required for this purpose. You will find further information
on using additional mobile units in Chapter 11.
Switching on the baby phone on the mobile unit
Press the MENU display button, select EXTRAS with the cursor and confirm with
the OK display button.
Select the BABY MONITOR setting and press the OK display button.
Choose the ON setting and confirm with the OK display button. The internal room
monitoring is now activated. An appropriate message will appear in the display.
Now place the mobile unit in the room that you want to monitor. In order to listen in to
the room, dial the internal number of the mobile unit. The call will be accepted directly
without ringing and you will be able to listen in to the room. To cancel room monitoring,
terminate the call with the
time by dialling the internal number of the mobile unit.
Switching off the baby phone on the mobile unit
You can switch off the BABY PHONE function with the CANCEL display button and
then OK.
6.3

Walkie-talkie

When you use several Type CD728 handsets, you can use the mobile units as walkie-
talkies. In the walkie-talkie mode, the mobile units are logged off from the base station.
You can therefore be as far away from the base station as you like. It is not possible to
receive external calls during this time. In order to use this function, several mobile units
must be switched to the walkie-talkie function. The range between two mobile units is
up to 50 m indoors and up to 300 m outdoors.
Preparing the mobile units
In order to use this function, you must switch each mobile unit individually to the
WALKIE-TALKIE function.
Press the MENU display button, select EXTRAS with the cursor and confirm with
the OK display button.
Select the WALKIE-TALKIE setting and press the OK display button.
Now select the number that the mobile unit is to be allocated during the WALKIE-
TALKIE function and confirm with OK. Repeat the procedure for the required
mobile units. The display buttons are now allocated the functions TALK and
CANCEL.
- Extras -
button. You can listen in to the room again at any
121