Setting Up Ring Tones And Signal Tones; Setting Up Ring Tones For The Mobile Unit - switel CD728 Mode D'emploi

- Setting ring tones and signal tones -

8 Setting up ring tones and signal tones

Sounds
8.1

Setting up ring tones for the mobile unit

Your mobile unit can respond with 20 different ring tones when a call comes through. If
you are using the telephone system with several mobile units, you can set different ring
tones for external and internal calls.
Press the MENU display button, choose SOUNDS by means of the navigation
keys and confirm with OK.
Select HANDSET with the navigation keys and confirm with OK.
The volume of the ring tone can be adjusted in five steps in the first line of the
display using the left and right navigation keys. When CRESCENDO is selected,
the ring tone starts quietly and becomes louder with each ring. If at any time you
do not want to be disturbed, you can also turn the ring tone off altogether. If the
ring tone is turned off, incoming calls will only be signalled at the base station and
by means of the display on the mobile unit.
Now use the navigation keys to move to the second line of the display and then
select the required ring tone for external calls.
If you are using the phone system with several mobile units, you can choose the
required ring tone for internal calls in the third line of the display.
Confirm with OK.
Press the
items from the menu.
TIP! If at any time you do not want to be disturbed, you can turn off the ring tone on the
mobile unit. Press and hold the
in the display. Incoming calls will now only be signalled at the base station and no
longer at the mobile unit. To switch the ring tone on again, press and hold the
button again for 2 seconds.
126
Handset
Base
HS Key Tones
HS Tones
button to return to the main display immediately or choose other
button for 2 seconds. The symbol will appear