Extras; Alarm/Wake-Up Function - switel CD728 Mode D'emploi

6 Extras

Extras
6.1

Alarm/Wake-up function

You can enter an alarm time using the integral wake-up and alarm function. When this
time is reached you will hear signal tones from the mobile unit for one minute and the
display will show the message ALARM with the current time. To stop the alarm, either
press the STOP display button or the SNOOZE display button. If SNOOZE is pressed, a
second alarm will be initiated automatically after 10 minutes. The volume of the alarm
cannot be adjusted.
You can find out how to set the time in Chapter 7.1.
Activating the alarm and wake-up function
Press the MENU display button, select EXTRAS with the cursor and confirm by
pressing the OK display button twice.
Select ON and press the OK display button.
Now select the required hours in the first line of the display with the cursor, and the
minutes in the second line.
Press the OK display button.
Press the
items from the menu. The alarm clock symbol
the alarm/wake-up function is switched on.
Switching the alarm and wake-up function on and off early
Press the MENU display button, select EXTRAS with the cursor and confirm by
pressing the OK display button twice.
Select OFF and press the OK display button.
Press the
items from the menu.
120
- Extras -
Alarm Clock
Baby Monitor
WalkieTalkie
Timer
Stopwatch
Touch&Dial
button to return to the main display immediately or choose other
button to return to the main display immediately or choose other
will appear in the display when