Limitations On Use; Feature Description; Intended Use - Dräger X-plore 6000 Notice D'utilisation

Description
2 Description
2.1 Product overview (refer to Figure A on
Page 3)
1 Mask connector
2 Control valve
3 Inner mask
4 Visor
5 Visor frame
6 Upper head-harness connector
7 Harness
8 Face seal
9 Carrying strap
10 Mask body
11 Clamping ring
12 Exhalation valve cover
2.2

Feature description

The full face masks have a round-thread connector according to
EN 148-1. This makes the full face masks suitable for respiratory
filters, powered air purifying respirators, SCBAs and airline equipment
with round-thread connectors according to EN 148-1 (RA).
The full face masks can be used at temperatures from
–30 °C to +60 °C.
Mask spectacles can be inserted for users who wear spectacles. A
welding protective visor can be retrofitted for full face masks with metal
frame.
2.3

Intended use

The full face masks protect the face and eyes against aggressive
media.
14
2.4

Limitations on use

WARNING
!
Beards and sideburns in the sealing area of the full face mask
will cause leakages! Therefore the full face mask should not
be used by anyone with facial hair of this sort. Earpieces in
the sealing area also cause leakages. Use special mask
spectacles.
2.5 Approvals
The full face masks are approved according to:
EN 136:1998 Cl. 3 or Cl. 2

TP TC 019/2011

(EU) 2016/425

Declaration of conformity: see www.draeger.com/product-certificates
The full face masks comply with the U.S. NIOSH regulations. They are
approved according to AS/NZS 1716:2012 in Australia and New
Zealand.
The full face masks may only be used with approved normal demand
lung demand valves, powered air purifying respirators, normal-
pressure airline equipment or respiratory filters with round-thread
connectors according to EN 148-1 (RA).
(approved by Dekra Exam) Dräger X-plore 6000