Use Of The Tli (Lower Limit Temperature) - ELMECO QK 1 Manuel D'utilisation Et De Maintenance

3. If you press the
4. Set the ON and OFF hours with the
button to move the cursor horizontally
If the On and Off hours are the same or they are set on "00:00" this function is deactivated.
5. After setting the time, press the
6. To exit the menu press the
If the machine is in "WAIT PLEASE" status, the product should not be ready to be served, but sometimes this might not
be true. If so, the customer can use the TLI function setting the correct temperature for the product.
In order to set the TLI see the following procedure:
1. Press the button on the electronic control panel to view the menu entries
2. Press the or
3. If you press the
following example the temperature is -6,4°C/20.5°F
4. Notice the temperature
5. Press the button to return to the previous screen
6. Press the or
7. Press the button to see the TLI temperature set on the control electronic board. In this example it is -
8,0°C/17.6°F
8. Set the new TLI with the
9. After setting the temperature, press the
10. To exit the menu press the
> NIGHT MODE
button, the ON and OFF hours are displayed on the control panel
On
00:00
or
button
button.

Use of the TLI (Lower Limit Temperature)

buttons until you reach the TANK TEMPERAT. screen
> TANK TEMPERAT.
button, on the lower line of the display you can see the temperature of the product. In the
TANK TEMPERAT.
-6,4°C •
buttons until you reach the TLI screen
>
TLI
-8,0°C
or buttons to the temperature reported at number "4"
TLI
-6,4°C
button.
NIGHT Off
00:00
buttons, in order to increase or decrease the value, and the
TANK TEMPERAT.
20.5°F •
TLI
TLI
17.6°F
TLI
20.5°F
button
- 31 -