Siemens Unity 2 Mode D'emploi page 54

Symbol:
Monitor
Pat. Resp. L
Pat. Resp. R
Inp. Aux. 1
Inp. Aux. 2
FF Loop
USB/PC
Insitu Left
Insitu Right
CD 1
CD 2
FF 1
DC/5 V
FF 2
100 – 240 V AC ...
54 Unity 2 – User Instruction Manual
Function:
Socket for monitor headset
Socket for left patient's response switch
Socket for right patient's response switch
Socket for input auxiliary 1 (AUX)
(Sensitivity 440 mVpp for VU = + 10 dB)
Socket for input auxiliary 2 (AUX)
(Sensitivity 440 mVpp for VU = + 10 dB)
Socket for free field loop
Socket for USB® cable to the PC
Socket for Insitu Headset left
Socket for Insitu Headset right
Socket for input CD 1 (Sensitivity 90 mVpp for VU = + 10 dB)
Socket for input CD 2 (Sensitivity 90m Vpp for VU = + 10 dB)
Socket for balanced output for a 4 or 8 Ohm loudspeaker used for free field measurements.
Power output 20 W into 4 Ohms.
Socket for 5 V power supply for UCO15 USB Optical Cable
Socket for balanced output for a 4 or 8 Ohm loudspeaker used for free field measurements.
Power output 20 W into 4 Ohms.
Socket for mains cable
Jack: Pin Assignment:
Mono Sleeve: Signal
Tip: Signal
Stereo Sleeve: Not used
Ring: Signal
Tip: + 3.3 Volt
Stereo Sleeve: Not used
Ring: Signal
Tip: + 3.3 Volt
Stereo Sleeve: Ground
Ring: + 12 Volt
Tip: Signal
Stereo Sleeve: Ground
Ring: + 12 Volt
Tip: Signal
Stereo Sleeve: Not used
Ring: Signal
Tip: Signal