Maintenance And Adjustment - EMAK TUAREG 92 EVO Manuel D'utilisation

6. MAINTENANCE AND ADJUSTMENT

Properly performed regular maintenance and inspection of the riding mower helps to increase its
problem-free operating lifetime. Worn or damaged parts must be replaced in time. When replacing
parts use only original spare parts, using non-original parts may damage the machine, endanger the
health of the driver or other persons and during the warranty period it voids the warranty. To order
spare parts always contact the machine's manufacturer or an authorised service centre.
6.1 OVERVIEW OF CHECKS AND MAINTENANCE
PART
Before every use
BATTERY
FUEL FILTER
BLADE HOLDER
ELECTRICAL
Check safety switches
CIRCUIT
HYDRAULIC CIRCUIT
Remove grass from
ENGINE COOLING the engine grill and
from the exhaust
DRIVE V-BELT
MOWING V-BELT
MOTOR OIL Check the level, fill up
V-BELT TENSIONING
Check if working
MECHANISM
OIL IN THE
HYDRAULIC CIRCUIT
OIL FILTER
OIL FILTER OF THE
TRANSMISSION
PARKING BRAKE Check if working
Check pressure and
TYRES
CONTROL ELEMENTS
RUBBER COVERS Check condition
Check condition and
FRONT DRIVE AXLE. fastening of all ball
(FOR MODEL joints and check the
AC 92-23 4x4) steering connection
Check the condition of
FRONT AXLE
the joints and wheels
GEAR BOX
GEAR STICK Check if working
STEERING
SPARK PLUGS
INTERVAL
After every 50 hours
of operation or 1x
per year
Check the level of the
---
electrolyte
---
Check
Check cable bundles
Check for leaks
Cleaning
Check for wear,
tension
Check for wear,
tension
Oil change
Check condition
---
---
---
Check mechanism
condition
---
rod
Lubrication of vertical
Check condition of
Check for leaks
Check belt tension
--- Check if working
---
Every 100 hours or
1x per year
---
--- Replacement
--- ---
---
--- ---
---
--- ---
--- ---
---
---
--- ---
--- Replacement
--- ---
---
--- ---
Check ---
--- ---
--- ---
---
joints
Check oil level
pulley
---
---
Clean and adjust or
---
replace
31
NOTE
Check the connection
---
---
---
---
---
---
---
---
---
Replacement after
200 hours of operation
Replacement after 200
hours of operation
Front 150kpa
Rear 80kpa
---
---
The ball joints must
have minimum
looseness.
The connecting rod
must not show signs of
damage (cracks)
---
Oil SAE 10w-40
5w-50 (4x4)
---
---
---