Disposal Of The Machine - EMAK TUAREG 92 EVO Manuel D'utilisation

9. DISPOSAL OF THE MACHINE

After the operational life of the machine is over, the owner of the machine is responsible for its disposal.
This may be performed in two ways:
a) Hand the machine over to a specialised company (scrap yard, secondary waste collection point, etc.).
You will receive documented confirmation of the handover for disposal.
b) Dispose of the machine yourself. In this case we recommend the following procedure:
 Dispose of the product utilising recyclable material according to the applicable waste disposal law.
 Disassemble the entire machine.
 Parts that can be reused should be cleaned, preserved and stored for further use.
 Separate the remaining parts into those that are and are not environmentally friendly, e.g. rubber
parts (gaskets), lubricant remains in the bearings or on gears. The environmentally harmful
components must be handled according to the relevant waste disposal law applicable in the country
of the user, e.g. in the Czech Republic it is the Waste Act No. 185/2001 Coll.
 Sort the waste according to the Wastes Catalogue in accordance with the relevant ordinance.
Handle environmentally friendly parts as a reusable resource.
45