Maintenance And Storage; Warranty Certificate - EMAK HC 750 E Manuel D'utilisation Et D'entretien

GB

8. MAINTENANCE AND STORAGE

• Switch off the hedge trimmer and pull out its
power plug before you put it down and clean it.
• For the best cutting performance at all times,
clean and lubricate the blades ate regular intervals.
Remove deposits with a brush and apply a thin
film of oil (see Fig.9).
Use bio-degradable oils.
• Clean the plastic housing and parts with a mild
household detergent and a damp cloth. Never use
aggressive agents or solvents.
• Be particularly careful not to allow any water to get
inside the machine.
• The supplied storage case can be fastened to the wall.
This is the best place to store your hedge trimmer.
• If necessary have the cord replace by a Servicing
Dealer.
9. DISPOSAL (Fig. 10)
In accordance with Directives 2002/95/CE, 2002/96/
CE and 2003/108/CE on the reduction of hazardous
substances in electrical and electronic equipment (ROHS)
and the disposal of waste from such equipment (WEEE).
When the symbol depicting a crossed-out refuse bin
appears on equipment, this means that it must be
collected separately from other waste at the end of its
working life.
When the equipment is no longer serviceable, accordingly,
it should be taken by the user to a special sorted collection
centre for electrical and electronic waste, or if purchasing
a new product of similar type, returned to the dealer on
a one-for-one basis (take back scheme).
Proper sorted collection ensures that the discarded
equipment can be sent subsequently for eco-friendly
recycling, treatment and disposal; this helps to avoid any
possible negative impact on the environment and on
health, besides enabling the reclamation of materials used
in manufacturing the equipment.
Unauthorized dumping of waste is irresponsible, and
punishable under statutory regulations.

10. WARRANTY CERTIFICATE

This machine has been designed and manufactured
using the most modern techniques. The manufacturer
MODEL
SERIAL No
BOUGHT BY Mr.
Do not send! Only attach to requests for technical warranties.
guarantees its products for 24 months from the date of
purchase, for private and hobby use. The warranty is
limited to 12 months in case of professional use.
Limited warranty
1) The warranty period starts on the date of sale. The
manufacturer, acting through the sales and technical
assistance network, shall replace free of charge any
parts proven defective in material, machining or
manufacturing. The warranty does not affect the
purchaser's rights as established under legislation
governing the consequences of defects in the machine.
2) Technical personnel will undertake the necessary
repairs in the minimum time possible, compatible
with organisational needs.
3) To make any claim under the warranty, this certificate
of warranty, fully compiled, bearing the dealer's
stamp, and accompanied by the invoice or receipt
showing the date of purchase, must be displayed to
the personnel authorised to approve work.
4) The warranty shall be null and void if:
- the machine has evidently not been serviced
correctly,
- the machine has been used for improper purposes or
has been modified in any way,
- unsuitable lubricants and fuels have been used,
- non-original spare parts and accessories have been
fitted,
- work has been done on the machine by unauthorised
personnel.
5) The warranty does not cover consumables or parts
subject to normal wear.
6) The warranty does not cover work to update or
improve the machine.
7) The warranty does not cover any preparation or
servicing work required during the warranty period.
8) Damage incurred during transport must be immediately
brought to the attention of the carrier: failure to do so
shall render null and void the warranty.
9) The warranty does not cover injury or damage caused
directly or indirectly to persons or things by defects in
the machine or by periods of extended disuse of the
machine resulting from the said defects.
DATE
DEALER
11