Transferring To A Wheelchair - Invacare Stand Assist Reliant RPS350-1E Manuel D'utilisation

Invacare® Stand Assist

6.3 Transferring to a Wheelchair

Detail A
Detail C
H = Wheelchair Brake
32
Detail B
1. Ensure the legs of the lift with the patient in the sling are in the
open position. Press the legs open button until in maximum
open position.
2. Move the wheelchair into position.
3. Engage the brakes of the wheelchair to prevent movement of
the chair (Detail A).
WARNING!
– DO NOT place the patient in the wheelchair if the
brakes are not engaged. The wheelchair brakes
MUST be in a locked position before lowering
the patient into the wheelchair for transport.
Otherwise, injury may result.
4. Position the patient over the wheelchair (Detail "B").
5. Press the down arrow button and lower the patient into the
wheelchair.
WARNING!
– Lock the rear swivel casters ONLY when
positioning or removing the sling (stand assist or
transfer stand assist) from around the patient.
Otherwise, injury may occur.
6. Lock the rear swivel casters.
7. Unhook the sling from all attachment points on the lift (Detail C).
8. Instruct patient to lift their feet off the foot plate. Assist the
patient if necessary.
9. Remove the sling from around the patient.
10. Unlock the rear casters and pull the stand assist lift away from
the wheelchair.
1078985-G