LORCH ControlPro Manuel D'utilisation page 53

Main menu table
Main menu
M6 Customer Access
M7 Machine data
02.20
Sub-menu
M6-2-12 MIGMAG Material upgrades
FE
FCAW M.
FCAW R.
CrNi 308
CrNi 316
AlMg
AlSi
CuSi
CuAl
M6-2-13 MMA electrode upgrades
rutile
basic
CEL
Gouging
M6-3 Parameter Limits
Current limit
Voltage limit
Wire feed limit
Arc length limit
Dynamics limit
M7-1 Firmware versions
Serial number
Operating System Display
Operating System Master
Operating system, process
Synergy programme version
Operating System DMR
M7-2 Counters
Operating hours counter
Power-on time
M7-3 Error Log
M7-4 Warnings log
M7-5 Diagnosis
Hold values
Operating voltages 1
Operating voltages 2
Module temperatures °C
Mild steel, low-alloy steel
Filler wire steel metal
Filler wire steel rutile
Chrome-nickel steel e.g. 1.4316
High-alloy chrome-nickel steel e.g. 1.4430
Aluminium-Magnesium
Aluminium-Silicon
Copper-silicon
Copper-aluminium
Rutile electrode: Electrodes with rutile coating
Alkaline electrode: Electrodes with alkaline coating
CEL electrode: Electrodes with coating containing cellulose,
suitable for downwards welding
Gouging
Here you can set the parameter limits in percentage for WPS
Welders (Authorization level 2 and 3).
Only possible above Authorization level 10 Administrator
Here we display the serial number of the unit
Operating system version number display
Master operating system version number
Version number operating system process
Synergy programme version number
Operating system DMR version number
Here we display the operating time (welding time) of the unit
Here we display the power-on time of the unit
Here we display the last errors that appeared on the unit
Here we display the last warnings (instruction messages) that
appeared on the unit
Here we display the last welded values of weld voltage and
weld current
Here we display the Operating voltages internal to the unit
Here we display the temperatures of the power modules
909.3059.9-03
Note
- 53 -