LORCH ControlPro Manuel D'utilisation page 52

Main menu
M5 User Interface
M6 Customer Access
- 52 -
Sub-menu
M5-2 LCD content configure
LCD Parameter
Current display
Material thickness
display
Display wire feed
Welding output display
M6-1 Customer Settings
M6-1-0 Access level startup
M6-1-1 Authorization level
0 Locked
1 Robot control / Read
Only
2 WPS Welder Basic
3 WPS Welder
Advanced
4 Welder Basic
8 Welder Advanced
10 Administrator
M6-2 Upgrades
M6-2 Remaining runtime demo
M6-2-10 Functional upgrades
Weld data
documentation
Seamtracking
Job-Tool
NFC Job write
NFC Job read
User Weld cycle
VRD
Dig. Push Pull
Pulse Multi-Material
M6-2-11 Process upgrades
TIG
MMA
Manual
SpeedArc Basic)
Normal CC
Synergic
SpeedArc
Puls
SpeedUp
Here you can select the display of the parameter A57 in the
graphic display A52
Here you can display and adjust the user authorisations
Here you can set the Access level startup (authorization level
at switch-on of the unit).
Only possible above Authorization level 10 Administrator
Here you can display the current authorization level
Theft protection
Robot control parameter setting/For info only on user inter-
face.
WPS Welder Basic
WPS Welder Advanced
Welder Basic
Welding supervisor (Standard)
Administration
Here you can display the available and installed upgrades
Indicates how long the test position or demo authorisation is
still valid
Monitoring and listing of welding data with a welding data
management system
Using seam tracking in automation
Software for administration and processing of Tiptronic Jobs
on PC
Tiptronic jobs can be written to NFC Job Cards
Tiptronic jobs can be read in via NFC Job Cards
4-stroke Individual operating mode
Reduction in idling voltage
Support for Push Pull torches
TIG
Electrode
MIGMAG Manual
MIGMAG Synergy
909.3059.9-03
Main menu table
Note
02.20