LORCH ControlPro Manuel D'utilisation page 40

 Exit the menu by pressing the Tiptronic setup A47 button
or the Menu button A50.
Copy Job to
9 The current/to be copied Job is displayed in the lower sec-
tion of the graphic display A52.
 Set the desired saved location by rotating the operating
button A49.
‰ If the saved location is marked only with the Job number
(e.g. 0-1), then this saved location is unoccupied/unde-
scribed. If the saved location is marked with a name after
the Job number (e.g. Job 1), then this saved location is oc-
cupied/described.
 Confirm the saved location by pressing the operating but-
ton A49.
‰ If an occupied saved location is selected during copying,
then a safety prompt appears to overwrite the job.
9 In the graphic display A52 the message "Job copied" ap-
pears briefly.
‰ If the Job to be copied has a Job Name modified by the
user, the Job Name is copied as well.
 Exit the menu by pressing the Tiptronic setup A47 button
or the Menu button A50.
Move Job to
9 The current/to be moved Job is displayed in the lower sec-
tion of the graphic display A52.
 Set the desired saved location by rotating the operating
button A49.
‰ If the saved location is marked only with the Job number
(e.g. 0-1), then this saved location is unoccupied/unde-
scribed. If the saved location is marked with a name after
the Job number (e.g. Job 1), then this saved location is oc-
cupied/described.
- 40 -
 Confirm the saved location by pressing the operating but-
ton A49.
‰ If an occupied saved location is selected during moving,
then a safety prompt appears to overwrite the job.
9 In the graphic display A52 the message "Job copied" ap-
pears briefly.
‰ If the Job to be moved has a Job Name modified by the
user, the Job Name is moved as well.
 Exit the menu by pressing the Tiptronic setup A47 button
or the Menu button A50.
When copying or moving a job, only individu-
i i i i
ally assigned job names will be applied, not the
standard names such as „Job 0-1".
Delete Job
9 The current/to be deleted Job is displayed in the lower
section of the graphic display A52.
9 A safety prompt is displayed in the upper section of the
graphic display A52 for deleting the Job.
 Select "Yes" by rotating the operating button A49.
 Confirm the deletion of the Job by pressing the operating
button A49.
9 In the graphic display A52 the message "Job deleted" ap-
pears briefly.
 Exit the menu by pressing the Tiptronic setup A47 button
or the Menu button A50.
909.3059.9-03
Tiptronic
02.20