Master Reset - LORCH ControlPro Manuel D'utilisation

Startup Menu
 You can now hold a mobile phone against the NFC read
surface A43 or scan the QR code.
‰ This will display the machine service data on the phone.
 To go directly to the start menu, press any key.
9 The startup menu is displayed in the graphic display A52.
 Select the desired menu point by rotating the operating
button A49.
 Confirm the menu point by pressing the operating button
A49.
‰ A description of the menu points is provided in Chapter
"20 Startup Menu Table" on Page 55.
‰ An overview of the menu points is available in Chapter "16
Menu structure Startup Menu" on Page 48.
 Exit the menu by pressing the Menu button A50.
02.20

Master Reset

i i
 To select the „Masterreset" menu, turn the operating but-
ton A49.
 Confirm the menu point by pressing the operating button
A49.
 Confirm the safety prompt.
Tiptronic Reset
i i
 To select the „Tiptronicreset" menu, turn the operating
button A49.
 Confirm the menu point by pressing the operating button
A49.
 Confirm the safety prompt.
909.3059.9-03
Caution!
All settings, main and secondary parameters
are reset to their factory setting.
Caution!
All Tiptronic Jobs will be deleted.
- 37 -