ahlmann AS 45 Manuel De L'opérateur page 159

Chargeuse pivotante
Table des Matières

Publicité

6.3
Montage et démon-
tage des équip. compl.
avec raccord. hydraulique
et actionnement électrique
6.3.1 Benne-preneuse
REMARQUE
- La fig. 6-19 montre la machine
avec benne-preneuse position
extrême lors de l'attaque du sol.
- Lors de l'actionnement du distri-
buteur de l'hydraulique cmpl.
(4-8/7) après un déverrouillage
(chapitre 5.5.2), les mâchoires
s'ouvrent et se referment.
- Lors de l'actionnement du distri-
buteur de l'hydraulique cmpl ef-
fectué tout en appuyant sur le
bouton électrique du distributeur,
la benne-preneuse est tournée
vers la gauche ou vers la droite.
- La benne peut être tournée à 290°
vers la droite ou la gauche.
Montage
Le montage est similaire à celui du
godet multifonctions (section 6.2.1).
DANGER
Les deux boulons du dispositif de
changement rapide doivent se trou-
ver des deux côtés dans les trous
de fixation de la benne-preneuse et
doivent être bien visibles (6-20/
flèche).
REMARQUE
Le raccordement électrique de la
benne se trouve sur la partie in-
térieure gauche de la flèche porte-
godet (6-21/flèche).
S45C
6.3
Mounting and dis-
mounting attachments
with a hydraulic connec-
tion and electric activation
6.3.1 Grab
NOTE
- Fig. 6-19 shows the grab in its
most far-reaching position at the
start of digging.
- When the pilot valve for the auxi-
liary hydraulics (4-8/7) is activa-
ted after it has been unlocked
(section 5.5.2), the grab scoops
open or close.
- When the pilot valve for the auxi-
liary hydraulics is activated and
the electric button on the the pilot
valve is simultaneously pressed
and held, the grab turns clock-
wise or counterclockwise.
- The grab may be swiveled around
its vertical axis by 290° in the
clockwise and counterclockwise
directions.
Mounting
Mounting is carried out in the same
way as for the multi-purpose bucket
(section 6.2.1).
DANGER
Both bolts of the quick-change de-
vice must fit in the boreholes on
both sides of the grab arm and must
be clearly visible at both sides (6-20/
arrow).
NOTE
The socket for the electrical grab
connection is on the left-hand side of
the inside of the bucket arm (6-21/
arrow).
6-8

Publicité

Table des Matières
loading

Table des Matières