Carel k.Air large Manuel D'utilisation page 142

FRE
Variable
ReHeatCoilWaterTemp.Confi gured_R
Al_FansOvld.Active
Al_CompOvld.Active
Al_HiP_Sw.Active
Al_LowP_Sw.Active
Al_SupplyAirFlwSw.Active
Al_RetAirFlwSw.Active
Al_AirFlwSw.Active
Al_AFreeze.Active
Al_LowSH_EVD_Emb.Active
Al_EEV_MotErr.Active
ReHeatCoilWaterTemp.PrbOk_R
Al_SettingOutOfBound_EVD_Emb.Active
Al_RangeErr_EVD_Emb.Active
Al_InvOffl ine.Active
Al_Inv01_OverA.Active
Al_Inv02_MotOvld.Active
Al_Inv03_DC_BusOverV.Active
Al_Inv04_DC_BusUnderV.Active
Al_Inv05_OverTemp.Active
Al_Inv06_DrvUnderTemp.Active
Al_Inv07_HW_OverA.Active
ReHeatCoilWaterTemp.Alrm_R
Al_Inv08_MotOverTemp.Active
Al_Inv09_OutputFault.Active
Al_Inv10_FlashDataErr.Active
Al_Inv11_ParamDef.Active
Al_Inv12_DC_RippTooLarge.Active
Al_Inv13_MB_CommFault.Active
Al_Inv14_DrvThermistorFault.Active
Al_Inv15_AutotuneFault.Active
Al_Inv16_DrvDis.Active
Al_Inv17_MotPhaseFault.Active
AuxPrb_1.Enable_W
Al_Inv18_FanFault.Active
Al_Inv19_SpeedFault.Active
Al_Inv20_PFC_Failure.Active
Al_Inv21_PFC_OverVolt.Active
Al_Inv22_PFC_UnderVolt.Active
Al_Inv23_STO_Survey1.Active
Al_Inv24_STO_Survey2.Active
Al_Inv25_GroundFault.Active
Al_Inv26_ADC_ConvSync.Active
Al_Inv27_HW_Sync.Active
AuxPrb_1.Confi gured_R
Al_Inv28_DrvOvrld.Active
Al_Inv29_uCSafe_DriveStop.Active
Al_Inv99_UnexpectedStop.Active
Al_StartFail_BLDC1.Active
Al_SwPrototype.Active
Al_retain.Active
Al_Err_retain_write.Active
Al_Offl ine_THTN.Active
Al_LowSupplyTemp.Active
AuxPrb_1.PrbOk_R
Warn_MainCoilTOutOfRange.Active
Al_SupplyAirFlwSwWarn.Active
Al_RetAirFlwSwWarn.Active
Al_AirFlwSwWarn.Active
Warn_AFreezeWarn.Active
Al_HumAlrm.Active
Al_WrkHrs_Hum.Active
142
Tableau des variables de supervision
Description
Postheat coil water temperature - Analog input confi gured
Fans overload - Alarm status
Compressor overload - Alarm status
High discharge pressure switch - Alarm status
Low suction pressure switch - Alarm status
Supply air fl ow switch alarm - Alarm status
Return air fl ow switch alarm - Alarm status
Air fl ow switch alarm - Alarm status
Antifreeze alarm - Alarm status
EVD-Low SH - Alarm status
EVD-Motor error - Alarm status
Postheat coil water temperature - Probe working correctly
EVD-Setting out of bound - Alarm status
EVD-Settings range error - Alarm status
Inverter-Offl ine - Alarm status
Inverter-Drive overcurrent (01) - Alarm status
Inverter-Motor overload (02) - Alarm status
Inverter-DC Bus overvoltage (03) - Alarm status
Inverter-DC bus undervoltage (04) - Alarm status
Inverter-Drive overtemperature (05) - Alarm status
Inverter-Drive undertemperature (06) - Alarm status
Inverter-HW overcurrent HW(07) - Alarm status
Postheat coil water temperature - Alarm probe broken
or disconnected
Inverter-PTC motor overtemperature (08) - Alarm status
Inverter-IGBT module error (09) - Alarm status
Inverter-CPU error (10) - Alarm status
Inverter-Parameter default (11) - Alarm status
Inverter-DC bus ripple (12) - Alarm status
Inverter-Data communication fault (13) - Alarm status
Inverter-Drive thermistor fault (14) - Alarm status
Inverter-Autotuning fault (15) - Alarm status
Inverter-Drive disabled (16) - Alarm status
Inverter-Motor phase fault (17) - Alarm status
Auxiliary probe 1 - Enable input
Inverter-Internal fan fault (18) - Alarm status
Inverter-Speed fault (19) - Alarm status
Inverter-PFC module error (20) - Alarm status
Inverter-PFC overvoltage (21) - Alarm status
Inverter-PFC undervoltage (22) - Alarm status
Inverter-STO detection error (23) - Alarm status
Inverter-STO detection error (24) - Alarm status
Inverter-Ground fault (25) - Alarm status
Inverter-ADC conversion sync fault (26) - Alarm status
Inverter-HW sync fault (27) - Alarm status
Auxiliary probe 1 - Analog input confi gured
Inverter-Drive overload (28) - Alarm status
Inverter-Drive overtemperature (HW) (29) - Alarm status
Inverter-Unexpected stop (99) - Alarm status
BLDC-Starting failure - Alarm status
Prototype software - Alarm status
High number of retain memory writings - Alarm status
Error in retain memory writings - Alarm status
th - Tune offl ine - Alarm status
Low supply temperature - Alarm status
Auxiliary probe 1 - Probe working correctly
Main coil water temperature out of range warning -
Alarm status
Supply air fl ow warning - Alarm status
Return air fl ow warning - Alarm status
Air fl ow warning - Alarm status
Antifreeze warning - Alarm status
Humidifi er alarm - Alarm status
Warning - Humidifi er maintenance required - Alarm status
Dim Modbus BACnet
1 DI104 BV562
1 DI1040 BV1269
1 DI1041 BV1270
1 DI1042 BV1271
1 DI1043 BV1272
1 DI1044 BV1273
1 DI1045 BV1274
1 DI1046 BV1275
1 DI1047 BV1276
1 DI1048 BV1277
1 DI1049 BV1278
1 DI105 BV563
1 DI1050 BV1279
1 DI1051 BV1280
1 DI1052 BV1281
1 DI1053 BV1282
1 DI1054 BV1283
1 DI1055 BV1284
1 DI1056 BV1285
1 DI1057 BV1286
1 DI1058 BV1287
1 DI1059 BV1288
1 DI106 BV564
1 DI1060 BV1289
1 DI1061 BV1290
1 DI1062 BV1291
1 DI1063 BV1292
1 DI1064 BV1293
1 DI1065 BV1294
1 DI1066 BV1295
1 DI1067 BV1296
1 DI1068 BV1297
1 DI1069 BV1298
1 DI107 BV565
1 DI1070 BV1299
1 DI1071 BV1300
1 DI1072 BV1301
1 DI1073 BV1302
1 DI1074 BV1303
1 DI1075 BV1304
1 DI1076 BV1305
1 DI1077 BV1306
1 DI1078 BV1307
1 DI1079 BV1308
1 DI108 BV566
1 DI1080 BV1309
1 DI1081 BV1310
1 DI1082 BV1311
1 DI1083 BV1312
1 DI1084 BV1313
1 DI1085 BV1314
1 DI1086 BV1315
1 DI1087 BV1316
1 DI1088 BV1317
1 DI109 BV567
1 DI1090 BV1318
1 DI1091 BV1319
1 DI1092 BV1320
1 DI1093 BV1321
1 DI1094 BV1322
1 DI1095 BV1323
1 DI1096 BV1324
k.air +030220982 rel 1.1 - 31.03.2020