Carel k.Air large Manuel D'utilisation page 143

Variable
Al_WrkHrs_SupplyFan.Active
Al_WrkHrs_ReturnFan.Active
Al_WrkHrs_ThrmlWheel.Active
AuxPrb_1.Alrm_R
Al_WrkHrs_DirtyFilt.Active
Al_DirtyFiltByDin.Active
Al_WrkHrs_Comp.Active
Al_HiRatioP_BLDC.Active
Al_DscgHiP_BLDC.Active
Al_HiCurr_BLDC.Active
Al_SuctHiP_BLDC.Active
Al_LowRatioP_BLDC.Active
Al_LowDeltaP_BLDC.Active
Al_LowDscgP_BLDC.Active
AuxPrb_2.Enable_W
Al_LowSuctP_BLDC.Active
Al_HiDscgTemp_BLDC.Active
Al_LOP_EVD_Emb.Active
Al_MOP_EVD_Emb.Active
Al_HiCondTemp_EVD_Emb.Active
Al_LowSuctTemp_EVD_Emb.Active
Al_EmergClos_EVD_Emb.Active
Al_DisStartDp_BLDC.Active
Al_ThTune_ClkBrd.Active
AuxPrb_2.Confi gured_R
Al_BMS_Offl ine.Active
Al_Selftuning_EVD_Emb.Active
Al_Offl ine_Humisonic.Active
Al_HiHum_Humisonic.Active
Al_LowHum_Humisonic.Active
Al_NoProd_Humisonic.Active
Al_FaultyDrn_Humisonic.Active
Al_Wmissing_Humisonic.Active
Al_ExtSignal_Humisonic.Active
AuxPrb_2.PrbOk_R
Al_Functest_Humisonic.Active
Al_Autotest_Humisonic.Active
Al_EEPROM_Err_Humisonic.Active
Al_Offl ine_EBM_SupplyFan.Active
Al_PhaseFault_EBM_SupplyFan.Active
Al_MotBlocked_EBM_SupplyFan.Active
Al_MainsUnderV_EBM_SupplyFan.Active
Al_MainsOverV_EBM_SupplyFan.Active
Al_DClinkOverV_EBM_SupplyFan.Active
Al_DClinkUnderV_EBM_SupplyFan.Active
AuxPrb_2.Alrm_R
Al_MotSuperHeating_EBM_SupplyFan.Active
Al_IntCircSuperHeat_EBM_SupplyFan.Active
Al_OutStageSuperHeat_EBM_SupplyFan.Active EBM supply fan-Power mod overheated (TFE) - Alarm status
Al_HallSenErr_EBM_SupplyFan.Active
Al_CommunicationErr_EBM_SupplyFan.Active
Al_OutStageHighTemp_EBM_SupplyFan.Active
Al_InternCircHighTemp_EBM_SupplyFan.Active EBM supply fan-Electronics interior temperature high
Al_MotHighTemp_EBM_SupplyFan.Active
Al_DClinkV_Low_EBM_SupplyFan.Active
Al_LimMainsPwr_EBM_SupplyFan.Active
AuxPrb_3.Enable_W
Al_LimMainsA_EBM_SupplyFan.Active
Al_BrakeMode_EBM_SupplyFan.Active
k.air +030220982 rel 1.1 - 31.03.2020
Description
Warning - Supply fan maintenance required - Alarm status
Warning - Return fan maintenance required - Alarm status
Warning - Thermal wheel maintenance required - Alarm
status
Auxiliary probe 1 - Alarm probe broken or disconnected
Warning - Filters maintenance required - Alarm status
Common - Dirty fi lters alarm - Alarm status
Warning - Compressor maintenance required - Alarm status
Compressor envelope-High compression ratio - Alarm status
Compressor envelope-High discharge pressure - Alarm status 1
Compressor envelope-High motor current - Alarm status
Compressor envelope-High suction pressure - Alarm status
Compressor envelope-Low compression ratio - Alarm status
Compressor envelope-Low diff erential pressure - Alarm status 1
Compressor envelope-Low discharge pressure - Alarm status 1
Auxiliary probe 2 - Enable input
Compressor envelope-Low suction pressure - Alarm status
Compressor envelope -High discharge temperature -
Alarm status
EVD-LOP - Alarm status
EVD-MOP - Alarm status
EVD-High condensing temperature - Alarm status
EVD-Low suction temperature - Alarm status
EVD-Emergency closing - Alarm status
BLDC-Delta pressure greater than the allowable at startup -
Alarm status
th - Tune clock not working - Alarm status
Auxiliary probe 2 - Analog input confi gured
BMS offl ine - Alarm status
EVD-Selftuning alarm - Alarm status
Humisonic-Offl ine - Alarm status
Humisonic-High humidity - Alarm status
Humisonic-Low humidity - Alarm status
Humisonic-No production - Alarm status
Humisonic-Faulty drain - Alarm status
Humisonic-Missing water - Alarm status
Humisonic-External signal not correctly connected - Alarm status 1
Auxiliary probe 2 - Probe working correctly
Humisonic-Functional test not executed - Alarm status
Humisonic-Autotest failure - Alarm status
Humisonic-EEPROM error - Alarm status
EBM supply fan-Offl ine - Alarm status
EBM supply fan-Phase Failure (PHA) - Alarm status
EBM supply fan-Locked motor (BLK) - Alarm status
EBM supply fan-Mains undervoltage (UeLow) - Alarm status
EBM supply fan-Mains overvoltage (UeHigh) - Alarm status
EBM supply fan-DC - link overvoltage (UzHigh) - Alarm status
EBM supply fan-DC - link undervoltage (UzLow) - Alarm status 1
Auxiliary probe 2 - Alarm probe broken or disconnected
EBM supply fan-Motor overheated (TFM) - Alarm status
EBM supply fan-Electronics interior overheated (TFEI) - Alarm status 1
EBM supply fan-Hall sensor error (HLL) - Alarm status
EBM supply fan-Communication error (SKF) - Alarm status
EBM supply fan-Output stage temperature high (TE_high) -
Alarm status
(TEI_high) - Alarm status
EBM supply fan-Motor temperature high (TM_high) - Alarm status 1
EBM supply fan-DC - link voltage low (UzLow) - Alarm status
EBM supply fan-Power limitation engaged (P_Limit) - Alarm status 1
Auxiliary probe 3 - Enable input
EBM supply fan-Current limitation engaged (I_Limit) - Alarm status 1
EBM supply fan-Brake mode (Brake) - Alarm status
Dim Modbus
1 DI1097
1 DI1098
1 DI1099
1 DI110
1 DI1100
1 DI1101
1 DI1102
1 DI1103
DI1104
1 DI1105
1 DI1106
1 DI1107
DI1108
DI1109
1 DI111
1 DI1110
1 DI1111
1 DI1112
1 DI1113
1 DI1114
1 DI1115
1 DI1116
1 DI1117
1 DI1118
1 DI112
1 DI1121
1 DI1122
1 DI1123
1 DI1124
1 DI1125
1 DI1126
1 DI1127
1 DI1128
DI1129
1 DI113
1 DI1130
1 DI1131
1 DI1132
1 DI1133
1 DI1134
1 DI1135
1 DI1136
1 DI1137
1 DI1138
DI1139
1 DI114
1 DI1140
DI1141
1 DI1142
1 DI1143
1 DI1144
1 DI1145
1 DI1146
DI1147
1 DI1148
DI1149
1 DI115
DI1150
1 DI1151
Tableau des variables de supervision
FRE
BACnet
BV1325
BV1326
BV1327
BV568
BV1328
BV1329
BV1330
BV1331
BV1332
BV1333
BV1334
BV1335
BV1336
BV1337
BV569
BV1338
BV1339
BV1340
BV1341
BV1342
BV1343
BV1344
BV1345
BV1346
BV570
BV1347
BV1348
BV1349
BV1350
BV1351
BV1352
BV1353
BV1354
BV1355
BV571
BV1356
BV1357
BV1358
BV1359
BV1360
BV1361
BV1362
BV1363
BV1364
BV1365
BV572
BV1366
BV1367
BV1368
BV1369
BV1370
BV1371
BV1372
BV1373
BV1374
BV1375
BV573
BV1376
BV1377
143