Storing The Product - Ryobi RLM5319SME Traduction Des Instructions Originales

STORING THE PRODUCT

When storing the mower for 30 days or more:
■
If using fuel stabilizer, follow stabilizer manufacturer's
directions to add stabilizer to petrol in fuel tank. Run
engine at least 10 minutes after adding stabilizer to
allow the stabilizer to reach the carburetor.
WARNING
Do not store the lawn mower with petrol in the tank
inside a building where fumes may reach an open fl ame
or spark.
■
If not using fuel stabilizer, allow the engine to run until
the mower is completely out of petrol.
■
Once the engine has stopped, allow the blade to come
to a complete stop and disconnect the spark plug wire.
■
Turn mower on its side (with carburetor facing up) and
clean grass clippings that have accumulated on the
underside of the mower deck.
■
Clean the underside of the mower deck.
■
Wipe the mower clean with a dry cloth.
■
Check all nuts, bolts, knobs, screws, fasteners, etc., for
tightness.
■
Inspect moving parts for damage, breakage, and wear.
Have repairs made on any damaged or missing parts.
■
Store the mower in a well-ventilated area that is clean,
dry, and out of the reach of children.
■
Do not store near corrosive materials such as fertilizer
or rock salt.
To lower the handle before storing:
■
Loosen the starter rope guide knob. Remove starter
rope from guide and allow to retract into engine.
■
Fully loosen the handle knobs on the sides of the
handle and fold the upper handle down.
■
Unscrew the lower handle lock nuts.
■
Fold the lower handle forward, making sure not to bend
or kink the control cables.
8
English