Storing The Product - Ryobi ZTR480ex Traduction Des Instructions Originales

NOTE: Always keep the drive levers at the
same height and angle.

STORING THE PRODUCT

The following steps should be taken before
storing the product:
Park the mower on a level surface, and
engage the parking brake.
Remove any build-up of grass and leaves
on or around the motor cover. Wipe the
product clean with a dry cloth. Do not use
water to clean the product.
Plug the product up to charge for the entire
time of storage.
NOTE: If it is not possible to leave the
mower charger connected during storage,
charge the batteries at least once a month
during storage. The batteries charge best
at temperatures from 0 °C to 40 °C.
Store the product in a clean, dry place that
is inaccessible to children. Do not store
near any appliance that operates with
flame such as a gas water heater, clothes
dryer, or furnace.
NOTE: Do not leave the start key in the
product during storage.
Keep the product away from corrosive
agents such as garden chemicals and de-
icing salts.
PREPARING FOR USE AFTER STORAGE
The following steps should be taken before
using the product after it has been stored:
Review maintenance chart.
Fully charge the batteries.
Check tyre pressure and inflate as needed.
Briefly drive the product, and check all
systems and components to ensure they
are functioning correctly.
EN
FR
DE
DA
SV
FI
NO
English | 37