Ryobi ZTR480ex Traduction Des Instructions Originales page 3

Safety, performance, and dependability have
been given top priority in the design of your
zero-turn mower.
INTENDED USE
The zero-turn mower is intended for outdoor
use only.
The product is designed for domestic lawn
mowing. The cutting blade should rotate
approximately parallel to the ground over
which it is being wheeled. All four wheels
should touch the ground while mowing.
The product is to be used only in domestic
application by adults who have received
adequate training on the hazards and preventive
measures or actions taken while using it.
Do not use the product for any other purpose.
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING
Read all safety warnings, instructions,
with this power tool. Failure to follow
all instructions listed below may result in
future reference.
The term "power tool'' in the warnings refers
to your mains-operated (corded) product or
battery-operated (cordless) product.
WORK AREA SAFETY
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
atmospheres, such as in the presence
of flammable liquids, gases or dust.
Power tools create sparks which may ignite
the dust or fumes.
Keep children and bystanders away
while operating a power tool. Distractions
can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet.
any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded.
Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock.
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
Damaged or entangled cords increase the
risk of electric shock.
When operating a power tool outdoors,
use an extension cord suitable for
outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric
shock.
If operating a power tool in a damp
Use of an RCD reduces the risk of electric
shock.
PERSONAL SAFETY
Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment
of inattention while operating power tools
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat or hearing protection
used for appropriate conditions will reduce
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying the
tool. Carrying power tools with your finger
on the switch or energising power tools that
have the switch on invites accidents.
before turning the power tool on. A
wrench or a key left attached to a rotating
part of the power tool may result in personal
EN
FR
DE
DA
SV
FI
NO
English | 1