Intended Use - Bosch MUZ9CC1 Mode D'emploi

Coupe-dés
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14

Intended use

This accessory is intended for the MUM9 kitchen machine
("OptiMUM" series) for use with the MUZ9VL1 continuous­feed
shredder. Follow the operating instructions for the kitchen
machine and the continuous­feed shredder.
Never use the accessory for other appliances. Only use matching
parts together.
This accessory is suitable for dicing food. Food which is to be
processed must not contain any hard components.
The accessory must not be used for processing other objects or
substances.
Safety instructions
W Risk of injury!
■ Never reach into the feed chute. Only use the pusher provided!
■ Never grasp the sharp blades or edges of the dicer insert. Take
hold of the cutter disc and cutting grid only by the plastic part!
Clean with a brush.
■ When the dicer insert is not in use, always leave assembled and
store with the blade guard fitted.
■ The accessory must be completely assembled before use. Never
assemble the accessory on the base unit. The accessory should
only be used in the intended operating position. Before attaching
or removing the accessory, wait until the drive has come to a
standstill and pull out the mains plug.
■ The dicer insert may only be used with the MUZ9VL1 continuous-
feed shredder.
W Caution!
Check that there are no foreign objects in the feed chute or housing.
Do not insert objects (e.g. knives, spoons) into the feed chute or
housing.
W Important!
It is essential to clean the accessory thoroughly after each use or
after it has not been used for an extended period. X "Cleaning and
maintenance" see page 12
Intended use
en
9

Publicité

Table des Matières
loading

Table des Matières