MC Crypt DJ-60 Notice D'emploi page 34

5. Connection and control elements
(22) Input sockets for channel B
Audio sources, such as CD players, cassette decks, MP3 players, record players or other reproduction devices, are
connected to these stereo cinch inputs.
You can switch the two LN-3/PH-2 sockets. You select the type of device (LINE or PHONO) with the LN-3/PH-2
selection switch (21).
(23) LN-1/PH-1 selection switch
This switch specifies whether a line device or a record player is connected at the LN-1/PH-1 input sockets.
LN-1 position > a line device (CD player, cassette deck etc.) is connected to the LN-1/PH-1 input
sockets.
PH-1 position > a record player (with magnetic system) is connected to the LN-1/PH-1 input sockets.
Always place the switch in the position intended for the device you have connected. Failure to
do so results in distortion, which could damage the mixer and the connected devices.
(24) Input sockets for channel A
Audio sources, such as CD players, cassette decks, MP3 players, record players or other reproduction devices, are
connected to these stereo cinch inputs.
You can switch the two LN-1/PH-1 sockets. You select the type of device (LINE or PHONO) with the LN-1/PH-1
selection switch (23).
34