Time-Delayed Measurement - geo-FENNEL GeoDist 100 Mode D'emploi

EN
OFFSET FUNCTION
Select and press
· switch the digits with the arrow buttons
· define the requested offset with + / -
· confirm with
The activation of the offset function will be displayed permanently
by this symbol
ATTENTION: The offset function is permanently active, even
after powering off/on of the unit. This function must be
de-activated after finishing the measuring task.

TIME-DELAYED MEASUREMENT

Select and press
The measurement starts after 5 seconds.
MEMORY
The instrument automatically saves the last 1.000 measured values.
Data recall
40
.