6. Basic functions
6.1. STANDBY
To switch on the device, press the STANDBY button on the device or on the re-
mote control. Information will appear on the display.
To switch the device back to standby mode, press the STANDBY button on the
device or on the remote control.
The device is now back in standby mode and the Standby LED lights up.
6.2. Automatic switch-off – SLEEP
You can set a time after which the device will automatically switch into standby
mode. The device needs to be switched on for this.
Press the SLEEP button on the remote control repeatedly to set the required
time: 90 minutes > 80 minutes > 70 minutes, etc. down to 10 minutes.
The SL symbol will appear on the display to show that the SLEEP timer has been
set.
To switch off the SLEEP timer, press SLEEP until S-00 appears on the display.
6.3. Sound settings
6.3.1. VOLUME
Press /VOL+ or /VOL– on the remote control or press the VOLUME -/+ on
the device to increase or decrease the volume. The volume level is displayed
(maximum 40).
6.3.2. EQ (Equaliser)
Press EQ on the remote control to select the required preset: FLAT, JAZZ,
CLASSIC, ROCK, POP.
6.3.3. Mute
To turn off the sound completely, press the MUTE button on the remote control.
The display will show MUTE. – Press MUTE or VOLUME to restore the sound.
7. Radio mode
If necessary, press the FM button to switch to radio mode, or press the
ton repeatedly until you reach the radio mode.
7.1. Tuning
Briefly press the TUN+ or TUN- buttons on the remote control to set a certain
frequency.
Hold down one of the buttons to automatically search for the next station.
DE
EN
FR
NL
but-
37